Software Update

ACCULINK PLATINUM 950 CONTROL SOFTWARE UPDATES

Software Upgrades

Upgrading the software on your AccuLink control will allow you to take advantage of the latest features and system enhancements. A standard SD memory card (non HD/HC) with 80 MB of free memory and a computer with an SD card reader or a USB to SD card adaptor are required to complete the upgrade process.

  • STEP 1 – Insert a blank SD card into your computer’s SD port or SD card reader.
  • STEP 2 – Right click on the following link.
    Download Version 4.0 Software for the AccuLink Platinum 950 Control
  • STEP 3 – Follow the instructions for your web browser below
    • Google Chrome
      • Select "Save link as..”
      • Save the file to the location of your SD card
    • Internet Explorer
      • Click “Save Target As...”
      • Save the file to the location of your SD card
    • Firefox
      • Click “Save Link As...”
      • Save the file to the location of your SD card
    • Safari
      • Click “Save”
      • Save the file to the location of your SD card
  • STEP 4 – Remove/Eject the SD card from your computer.
  • STEP 5 – Insert the SD card into your AccuLink Platinum 950 Control.
  • STEP 6 – Press… Menu > Settings > Network > Software Upgrades > Next > then select "Check for upgrades on SD Card" to start the install process. Follow the on-screen prompts to complete the software upgrade.

Note: Press the “Help” and then “About” buttons on your AccuLink control to see the currently installed software version.

PLATINUM 850 AND GOLD 824 SOFTWARE UPGRADES

Automatic Upgrades

The Platinum 850 and Gold 824 controls connected to Nexia™ Home Intelligence will be upgraded automatically whenever a new software release is available.

Local Upgrades

Required:

- Standard USB flash drive
- USB-Micro USB adaptor (included with control)
- Computer with USB port

STEP 1 - Insert a USB flash drive into your computer's USB port
STEP 2 - Click on the following software upgrade link and download to the flash drive

Gold 824: Download Version 2.0 Software
Platinum 850: No Software Update at this Time.

STEP 3 - Remove flash drive from your computer
STEP 4 - Insert the Micro USB-to-USB adaptor cable, included with your control, into the Micro USB port on the side of the control. The control needs to remain powered during the upgrade process. Do not de-power the control or pull it off the wall during the upgrade process.
STEP 5 - Connect the flash drive into the USB side of the cable
STEP 6 - Press Menu > Settings > SW Upgrades. Follow the on-screen prompts to complete the software upgrade