Furnace Not Blowing Hot Air? Find Out Why
Key takeaways:
• There may be an easy fix, such as changing thermostat settings or changing the filter.
• Some furnace issues will require furnace repair.
• Regular furnace maintenance can help prevent future problems.

By Anne Fonda
Did you come home from work to an icebox of a house? Or did your teeth start chattering the moment you rolled out of bed? If so, it’s time to investigate.
Common reasons your furnace is blowing cold air or not working at all
Reason #1: Thermostat issues
Your thermostat is the brain of your heating and cooling system. It tells the furnace when to heat and what temperature to reach. If your thermostat is to blame for your furnace not blowing warm air/blowing cold air, it’s a free and easy fix.
The problem: The thermostat is set to Cool instead of Heat
The solution: Simply set the thermostat to Heat.
The problem: The fan is set to On instead of Auto. The fan will blow cool or cold air when the furnace isn’t running.
The solution: Switch to Auto so the fan only runs when the furnace is running.
The problem: Incorrect temperature setting.
The solution: Check the thermostat and raise the temperature to a comfortable level that is above the current indoor temperature.
The problem: Your thermostat batteries are dead or dying.
The solution: Replace the batteries and consider upgrading to a wired smart thermostat.
The problem: You messed up your DIY thermostat installation. If the furnace problem happens shortly after you installed a new thermostat, you may have chosen a thermostat that isn’t compatible with your furnace, or you wired it incorrectly.
The solution: You may want to call an HVAC professional to straighten things out.
Reason #2: Filter issues
The problem: A dirty or clogged furnace filter restricts airflow to your furnace, which can restrict the circulation of warm air in your home. A clogged air filter can also cause the furnace to overheat and shut down as a safety precaution.
The solution: Change the filter. Turn off the furnace, then replace the dirty/clogged furnace filter with a new one. Turn the furnace back on and see if this solves the problem. Get in the habit of replacing the filter every 1-3 months, depending on the quality of the filter. You may need to change it more often if you have pets.
Your thermostat may display a reminder to do this, but you can also set an alert in your smartphone calendar. Consider ordering air filters online and setting up a subscription so you always have one on hand.
Reason #3: Fuel supply issues
The problem: No fuel is reaching the ignition system.
The solution: If you have an oil or propane furnace, make sure that you have fuel in the tank. If you have a natural gas furnace, make sure the furnace gas valve is open.
#4: High limit switch issues
The problem: High-limit switch failure. Your furnace has a safety feature called a high-limit switch. If it senses that the furnace is overheating, it will shut things down. A dirty or clogged filter can cause repeated overheating, and repeated overheating can cause the high-limit switch to fail altogether. At this point, your furnace stops burning fuel and instead continually blows cool air.
The solution: Call an HVAC company. An HVAC technician can troubleshoot and replace the switch. Remember to change your filter to prevent problems in the future.
Reason #5: Condensate drain line issues
The problem: A clogged condensate drain line. High-efficiency furnaces, or condensing furnaces, produce condensation during the heating process. Without regular maintenance, the drain line or drain pan can become clogged with dirt, debris, spiderwebs, etc. An early indicator of this problem is a puddle of water near your furnace.
A clog in the condensate drain line triggers a safety measure that prevents the burners from igniting, sending cool air blowing through the registers.
The solution: Get an HVAC technician to clear the condensate drain line and drain pan, and check the condensate pump, if you have one. Ask them to show you how to prevent this problem in the future.
Reason #6: Ignitor issues/pilot light issues
The problem: Furnace not igniting. The furnace pilot light keeps going out or the furnace electronic ignitor isn’t working.
The solution: If you have an older furnace with a pilot light that has gone out, you will need to reset the furnace and relight the pilot light. Follow the instructions in your owner’s manual or instructions you find for your heating system online. If the problem continues, call an HVAC professional.
Newer furnaces have an electronic ignition system that will have to be evaluated and fixed by an HVAC professional.
Reason #7: Burner issues
The problem: Blocked or clogged burners. Over time, dirt and grime can accumulate on the furnace burners, preventing fuel from getting through. Without no fuel to burn, the furnace can't produce heat. Since a blocked burner doesn't affect the blower fan, the system will push cool air out through the registers and into your home.
The solution: Clean the burners. A handy homeowner may be able to do this themselves, but we would recommend calling an HVAC professional. If there is thick grime buildup, your furnace system is likely overdue for full maintenance.
Reason #8: Flame sensor issues
The problem: Dirty or failing flame sensor. The combustion process creates soot and grime that can collect on the flame sensor and keep it from detecting the flame and initiating the ignition process. The blower fan may keep running, sending cool air throughout your home.
The solution: Clean the flame sensors. If the flame sensor is failing, you’ll need an HVAC professional to replace it.
Reason #9: Ductwork issues
The problem: Leaky ductwork. If your air ducts have gaps/are leaking, your HVAC system will pull cold air into the ducts in the winter and leak warm air. In the summer, it will bring hot air into the ducts and leak cool air. This creates uncomfortable conditions such as uneven heating and cooling where one room stays cold all winter or hot all summer. Leaky ductwork can also cause higher energy bills.
The solution: This issue is bigger than just your furnace (or your AC unit/heat pump). You can seal some visible gaps yourself, but you will need an HVAC company to assess your ductwork for leaks and determine if duct sealing will solve the problem or if you need to replace some or all of your ductwork system to achieve the best comfort and efficiency.
Regular furnace maintenance can prevent problems
“Routine maintenance is one of the simplest ways to help prevent furnace failures and keep your system running safely and efficiently. Simple steps like changing filters, keeping vents clear, and maintaining clean burners will help prolong the efficiency and life of your furnace.
Scheduling a regular maintenance program with your local HVAC dealer can help identify potential issues early, before they become more costly repairs. A well-maintained system lasts longer, performs better, and delivers more reliable comfort.”
- Kimberly Sexton, Senior Systems Engineer

What does furnace maintenance include?
DIY maintenance includes changing the HVAC air filter every 1-3 months, year-round. To promote good airflow, you should also ensure that your supply registers and return air vents are clear and not blocked by furniture or curtains.
Professional furnace maintenance should be performed each fall before heating season is in full force. During this visit, an HVAC technician will check under the hood, so to speak, to ensure all furnace components are clean, in working order, and operating safely. They may also check your thermostat and measure airflow.
Many HVAC companies offer yearly HVAC maintenance plans that include fall and spring tune-ups for your heating and cooling systems. Some plans place you on a priority list for HVAC repair or give you a discount on parts.
Schedule furnace repair or maintenance today
Your local American Standard HVAC pro can maintain or repair any brand of furnace – you don’t have to have an American Standard furnace. For future peace of mind and proactive maintenance, consider installing the HVAC Performance Monitoring Kit and downloading the homeowner app.
Contact your local dealer today to help keep you cozy and warm.
Anne Fonda
Content Writer, Trane Technologies
A Content Writer with Trane Technologies, Anne Fonda researches topics and writes for Trane® and associated residential HVAC brands. She works in collaboration with Trane Technologies subject matter experts, offering easy-to-understand, informative content on complex topics. Her goal is to help consumers make informed decisions on the products and services they need.
She has written for HVAC and other service provider websites for over 16 years. Before transitioning to web content writing, Anne had a 14-year stint as an award-winning journalist. She graduated cum laude from the University of Missouri-Columbia School of Journalism.
When she’s not working, Anne enjoys playing word games, reading, gardening, spending time with family, and visiting gardens and museums.
Expert review by Kimberly Sexton, Senior Systems Engineer
